主营:铝业瓶
所在地:
上海 上海
产品价格:
电议
最小起订:
1
发布时间:
2023-09-11
有效期至:
2023-10-11
进口高温高压电站截止阀
德国巴赫进口高温高压电站截止阀概述:Introduction of globe valve for high temperature and high pressure power station imported from Germany by Bach:
进口高温高压电站截止阀也称电站专项使用截止阀,电站截止阀与其他截止阀产品相比的特点是高温高压,独特的自密封设计,压力越高,密封越可靠。由于性能技术特性、工况的特殊使产品也形成了其他产品所替代不了的特点。
进口高温高压电站截止阀的定义:Definition of globe stop valve for imported high temperature and high pressure power station:
1.产品设计制造按ASME B16.34、E101标准,可与进口设备配备使用。
2.阀门中腔采用压力自紧式密封结构,内腔压力越高密封性能越好。
3.支管两端为对焊连接,适应不同的接管要求。
4.阀瓣、阀座的密封面采用stellite 司太立钴基硬质合金堆焊而成,耐磨、耐高温,抗擦伤性能好、使用寿命长。
5.阀盖填料函尝试合理,填料加缓蚀剂,密封可靠,开关平稳。
6.阀门具有上密封结构,保证阀门开启运行时阀杆处不会外漏。
7.电动截止阀的开启和关闭由电动装置来控制,电动装置分别配有专项使用电机、减速器、转矩控制机构,现场操作机构,手动、电动切换机构。除就地操作外,还可进行远距离操作。
The definition of the cut-off valve imported high temperature high pressure power station:
1 product design and manufacture according to ASME B16.34, E101 standard, can be equipped with imported equipment.
2 valve cavity pressure self sealing structure, the higher the pressure inside the sealing performance is better.
3 pipe ends welded connection, meet the requirements of different nozzle.
4 sealing surface of the valve clack and the valve seat adopts Stellite Stellite cobalt based alloy surfacing and wear resistant and heat resistant, anti abrasion performance and long service life.
5 valve cover filler letter try reasonable, filler plus corrosion inhibitor, reliable sealing, stable switch.
6 valve has a seal structure to ensure that the valve is not open when the valve stem leakage.
7 electric valve opening and closing by the electric device to control, electric devices are equipped with a dedicated motor, reducer, torque control mechanism, the field operation mechanism, manual, electric switching mechanism. In addition to local operation, but also for remote operation.
进口高温高压电站截止阀技术参数:Technical parameters of stop valve for imported high temperature and high pressure power station:
产品名称 |
驱动方式 |
连接形式 |
结构形式 |
密封结构 |
压力范围 |
公称通径 |
常用材质 |
产品型号 |
进口高温高压电站截止阀 |
手动、电动 |
焊接 |
阀瓣非平衡式 |
硬密封 |
10.0-32.0MPa |
DN10-270 |
铸钢、铬钼钢、铬钼钒钢 |
bach-a |
阀门尺寸标准
|
阀门试验标准
|
阀门交货标准
|
工业阀门标准
|
法兰阀门标准
|
焊接阀门标准
|
对夹式连接阀
|
内螺纹连接阀
|
可以提供美国 |
DIN EN558-2005
|
DIN EN12266-1-2003
|
DIN3230-2-1974
|
DIN EN 1171-2003
|
DIN EN 3202-1977
|
DIN EN 3202-1982
|
DIN EN 3202-1979
|
DIN EN 3202-1977
|
API、ANSI等标准
|
联系人:
陈国煌 (联系时请告诉我是"铝道网看到的 信息,会有优惠哦!谢谢!)
手机:
座机:
传真:
邮箱:
21157483878@qq.com
联系地址:
上海市徐汇区龙漕路51弄1604室