苏州迈浦特机械有限公司

主营:模温机,油温机,水温机,油循环温度控制机,水循环温度控制机,冷冻机,导热油加热器,冷热一体机

工业煤改电硫化机专项使用导热油控温设备

产品信息

产品详细

   导热油控温设备结构性能介绍   MPWH-30-70

 

173-726O-59O6  Mold temperature rise, small temperature difference, energy-saving more than 20%. Use flange type Swedish wire double power stainless steel electric heating pipe It is used in different temperature control occasions, Imported hot wire, long service life, not easy to burn out; //www.dianjiareyoulu.com pressure indicator Table: solenoid valve imported from Taiwan tripod brand UNID, high temperature 180 degrees. Back water thermometer can monitor mould Whether the hole is blocked or not and the injection forming condition is stable. High voltage safety protection system, explosion protection device, high voltage safety Valve. Pressure system pump adopts Italy "fryde" small flow, high pressure. Cooler: the South Korean Poret Beijing plate heat exchanger with high cooling speed and accurate temperature control. Adopt "Fuji", no fuse switch, short circuit and pass Rapid protection. The electromagnetic contactor adopts the French "Schneider" or the German "Admiralty Muller", and the service life is long; It adopts the "WEST" double group P.I.D. automatic calculation type glass liquid crystal temperature controller, which is imported from England. (heating and cooling P, I, D automatic calculation function, more accurate temperature control, energy saving, can save more than 35%; flow failure display is easy Maintenance, no professional maintenance personnel, surge wave filter and absorption device, adapt to unstable voltage environment. Imported PC plate mining With DC loop control, anti - interference, low voltage, long life; 工业煤改电硫化机专项使用导热油控温设备

 173-726O-59O6  模具升温快,温差小,节能20%以上。使用法兰型瑞典丝双功率不锈钢电热管,适合不同温控场合使用,

进口电热丝,使用寿命长,不易烧坏;//www.dianjiareyoulu.com压力指示表;电磁阀采用宝岛原装进口鼎器牌UNID,耐高温180℃。回水温度表,能监测模具孔内有无阻塞,射出成形条件是否稳定。高压安全保护系统,防爆装置.高压安全阀.加压系统水泵采用意大利“福利德”小流量,大压力.冷却器:采用韩国“波雷京”板式热交换器,冷却速度快,温控准确。采用“富士”无熔丝开关,短路和过载迅速保护。电磁接触器采用法国“施耐德”或德国“金钟穆勒”,工作寿命长;采用原装进口英国“WEST”双组P.I.D.自动演算型玻璃液晶温控器,(加热和冷却均有P I D 自动演算功能,温控更准确节能)可省电35%以上;流程故障显示,容易检修;无须专业维修人员.突波过滤及吸收装置,适应电压不稳环境。进口PC板采用DC回路控制,抗外界干扰,低电压寿命长;上述图片及建议仅供参考,详细型号请咨询我们,更多型号请访问我们的网站 或致电我们了解"。173-726O-59O6  袁

 

联系方式

相关产品

拨打电话 立即询盘