本机特点

1、采用先进的美国PANGBORN设计技术，从而使机器外貌构思新颖，操作使用及维修十分方便。

1、 Adopt the Advanced Pangborn Design Technology, so that the appearance of the machine is novel, operation and maintenance is very convenient.

2、打砂室共6台打砂器的布置，坐标位置采用（Computer Aided Design）三维动态抛射仿真后确定确保单侧一只抛丸器仍然可以覆盖整个工件的一侧。

2、The layout of six sand blowers in the sanding chamber was determined by Computer Aided Design (Computer Aided Design) after three-dimensional dynamic projection simulation to ensure that one shot blast can still cover the whole side of the workpiece.

3、配有大流量除尘排风系统，使清理室体始终保持一定的负压，从而循环室体内的气流冷却室内空气以及弹丸的温度，使打砂达到最高效率强度。

3、Equipped with a large flow dust removal and exhaust system, so that the clean room always keep a certain negative pressure, so that the air in the circulation room cooling room air and the temperature of the projectile, so that the sand to achieve the highest efficiency intensity

4、采用先进的沙尘分离器，粉尘分离效果好，喷砂效率高。

4、Adopt advanced sand-dust separator, dust separation effect is good, sandblasting efficiency is high.

5、气动控制阀装置，有效控制砂丸器开、停时间，避免砂丸器无效空抛，节约能量，提高室体护板，打砂器等易件寿命。

5, pneumatic control valve device, effective control shot open, stop time, to avoid shot invalid air-cast, save energy, improve the chamber plate, sand grinder and other components life.

6、使用砂料为：缸砂、钢丸、不锈钢丸、圆角钢砂等。

6、Use Sand: cylinder sand, steel shot, stainless steel shot, round angle steel sand, etc.

使用范围：本系列合适于平板类和各类中小型结构件的打砂清理，以去掉工件表面上的铁锈，氧化皮，污物等使工件表面呈现金属本色，消除工作内部应力，增加工件喷漆时的漆膜对着力。

本机参数